Copy of Commercial Reverse Osmosis RO Systems RO-200

Pure Aqua’s commercial reverse osmosis system “RO-200 series” is a compact and energy-efficient commercial RO unit, designed ideally for tap, brackish and drinking water treatment applications. Our small commercial reverse osmosis equipment is capable of reaching incredibly high recovery rates.

As a global supplier, we offer a full line of pre-engineered and custom reverse osmosis systems for commercial use, ranging from 600 to 18,000 GPD. These commercial RO systems produce high-quality water at a very low cost, all of which are engineered using the most advanced technology for accurate and customized solutions.

Benefits of Our Commercial RO Systems

A commercial ro system will take care of removing unwanted dissolved solids from your tab, brackish or well water through the utilization of highly efficient reverse osmosis membranes. Less wastewater, low energy consumption, high flow rates and contaminant rejection at competitive prices makes our commercial ro system the most valuable in the market. These systems incorporate dependable components and an extremely sturdy construction, along with highly desirable features from years of experiences of producing high quality commercial reverse osmosis purifiers.

Additional perks provided by our commercial ro water system include:

• Compact, Heavy Duty, Powder Coated Carbon Steel Frame
• Membranes from most reputable brands
• Long-lasting performance
• Tried and tested (trouble-free operation)
• Minimal membrane fouling
• Cost-effective
• Enhanced energy efficiency
• Reduction of scaling deposits
• Fresher, clearer improved tasting water

Commercial Reverse Osmosis Process:

Skid mounted commercial reverse osmosis purifiers are tasked with purifying water from water sources such as lakes, rivers and wells. A commercial RO system utilizes a high pressure pump that pressurizes brackish or saline water against the surface of a semi-permeable membrane containing small pores. Water molecules are only permitted to flow through the small pores while blocking impurities such as salt, particles, minerals, and other organics from passing through. These small pores have a strong capability of rejecting bacteria and disease-causing pathogens. At the end of this process, clean, purified water emerges on the lower-pressured side while salts, minerals, and other organics are sent into the brine stream then into a drain.

Custom & High Capacity Commercial Reverse Osmosis Filtration Systems:

Our commercial reverse osmosis units are manufactured to be with user-friendly, environmental friendly, long-term reliability, and robust construction in mind.

A commercial RO system can be customized based on individual design needs to include chemical dosing, cleaning skids, antiscalant, filters and more. Our commercial reverse osmosis machine can accommodate between 600 to 18,000 GPD, with feed water TDS of 1,000 to 5,000 ppm. These features have the capability of removing hardness, chlorine, odors, color, iron, and sulfur. Economical and efficient, RO-200 commercial reverse osmosis machines acquire the latest in reverse osmosis technology to remove dissolved salts, particles, organics, minerals, tannins and other contaminants from water with a molecular weight greater than 150-250 Dalton. At Pure Aqua, we use the most efficient, energy saving, high rejection membranes made by Dow Filmtec, Hydranautics, Toray.

Commercial Reverse Osmosis System Schematic Diagram:

Commercial Reverse Osmosis System Buying Guide:

The following considerations should be made when choosing the right water treatment system:

• Flow rate (GPD, m3/day, etc.)
• Feed Water TDS.
• Iron
• Manganese
• TSS
• SDI< 3
• Water must be free from oils and grease
• Chlorine must be removed
• Available Voltage, Phase, and Frequency
• Installation Location & Footprint

Visit this page to learn more about who makes the reverse osmosis system

Commercial Reverse Osmosis System Cost:

A commercial reverse osmosis machine cost is largely dependent on feed water quality and the required product water quality.

The following list details many of the common pre and post treatent components employed with RO systems.

• Prechlorination dosing
• Media filter
• Carbon filter
• Water softener
• Antiscalant dosing
• NSF components
• Advanced controller
• Advanced instruments
• Iron removal filter
• High TDS application
• Skid mounted system
• Calcite filter
• Blending systems
• Three phase system
• Variable frequency drive VFD

[custom-specifications]

Note: If the feed water TDS exceeds 2,000 ppm, the system model number changes to BW-XXXK-XXXX, and a suffix is added to the end of the model number: “-5” is added if the TDS is 5,000 ppm or less. Example: Required system to produce 9,000 GPD with a feed water TDS of 5,000 ppm, the corresponding model number is: “BW-9.0K-640-5”.

*** Higher capacity systems are available. Learn more about:

RO-300 Series: 13,000 - 32,000 GPD

RO-400 Series: 28,000 - 173,000 GPD

RO-500 Series: 200,000 - 900,000 GPD

[/custom-specifications]

[/custom-features]

[custom-documents]

Disclaimer

The brochures and datasheets below are provided for convenience. Pure Aqua, Inc. bares no responsibility for the accuracy of the information they contain.

[/custom-documents]

[custom-360-view]

Here at Pure Aqua, Inc., we engineer and build all of our water treatment systems in-house.

Our turn-key water treatment systems are all pre-engineered using the latest CAD technology available.

This enables our teams to build and deliver treatment systems to our customers with quick turnaround times.

Many of our customers require custom engineered systems. These are typically built around similar core systems and thus allowing for improved turnaround times, even for one-off designs.

 

[/custom-360-view]