ENGLISH
ESPAÑOL
???????
PORTUGUÉS
FRANÇAIS
Length Converter
LENGTH CONVERTER
LENGTH CONVERSION TABLE
| From | Miles | Yards | Feet | Inches | Meters | Kilometers |
|---|---|---|---|---|---|---|
| Mile | 1 | 1761 | 5280 | 63398 | 1610 | 1.61 |
| Yard | 5.7 10-4 | 1 | 3 | 36 | 0.914 | 9.14 10-4 |
| Foot | 1.89 10-4 | 0.33 | 1 | 12 | 0.3048 | 3.05 10-4 |
| Inch | 1.58 10-5 | 0.0278 | 0.0833 | 1 | 0.0254 | 2.54 10-5 |
| Meter | 6.21 10-4 | 1.09 | 3.28 | 39.37 | 1 | 0.001 |
| Kilometer | 0.621 | 1094 | 3280 | 39370 | 1000 | 1 |
| Hectometer | 0.0621 | 109.4 | 328 | 3937 | 100 | 0.1 |
| Centimeter | 6.21 10-6 | 0.0109 | 0.0328 | 0.394 | 0.01 | 0.00001 |
| Decimeter | 6.21 10-5 | 0.109 | 0.328 | 3.937 | 0.1 | 0.0001 |
| Milimeter | 6.21 10-7 | 0.00109 | 0.00328 | 0.039 | 0.001 | 0.000001 |
| Micrometer | 6.2 10-10 | 1.09 10-6 | 3.28 10-6 | 3.9 10-5 | 10-6 | 10-9 |
| Nanometer | 6.21 10-13 | 1.09 10-13 | 3.28 10-9 | 3.9 10-8 | 10-9 | 10-12 |
| From | Hectometers | Centimeters | Decimeter | Milimeter | Micrometer | Nanometer |
|---|---|---|---|---|---|---|
| Mile | 1.61 10-2 | 1.61 105 | 1.61 104 | 1.61 106 | 1.61 107 | 1.61 1012 |
| Yard | 9.14 10-3 | 91.4 | 9.14 | 914 | 9.14 105 | 9.14 108 |
| Foot | 3.05 10-3 | 30.48 | 3.048 | 304.8 | 3.05 105 | 9.14 108 |
| Inch | 2.54 10-4 | 2.54 | 0.254 | 25.4 | 2.54 104 | 2.54 107 |
| Meter | 0.01 | 100 | 10 | 1000 | 106 | 2.54 107 |
| Kilometer | 10 | 105 | 104 | 106 | 109 | 1012 |
| Hectometer | 1 | 104 | 1000 | 105 | 108 | 1011 |
| Centimeter | 0.0001 | 1 | 0.1 | 10 | 104 | 107 |
| Decimeter | 0.001 | 10 | 1 | 100 | 105 | 108 |
| Milimeter | 0.00001 | 0.1 | 0.01 | 1 | 103 | 106 |
| Micrometer | 10-8 | 10-4 | 10-5 | 10-3 | 1 | 103 |
| Nanometer | 10-11 | 10-7 | 10-8 | 10-6 | 10-3 | 1 |
DEFINITION OF LENGTH
Length is a proportion of separation. In the International System of Quantities, length is an amount with measurement separation. In many frameworks of estimation, the unit of length is a base unit, from which different units are determined.
Length is usually comprehended to mean the most broadened component of an article.
Kinds of length incorporate stature, which is vertical length or vertical degree, and width or broadness, which are the side-to-side length, estimating over the article at right edges to the tallness.
Length is a proportion of one measurement, while territory is a proportion of two measurements (length squared) and volume is a proportion of three measurements (length cubed).
A nautical mile is currently 1852 m (6080 feet) - it was initially characterized as one moment of circular segment of an incredible circle - or 1/60 of 1/360 of the world's circuit. The standard mile is all the more decisively referred to as the resolution mile - as characterized by rule or law.