null
Toray Membrane Bioreactor (MBR) Modules

Toray Membrane Bioreactor (MBR) Modules

Toray's MEMBRAY® MBR Membranes are PVDF flat sheet membranes with a PET non-woven support layer. The nominal pore size is 0.08 microns with a narrow pore size distribution. Toray membrane elements with a 1.4 m² or a 0.9 m² membrane area are joined to our membrane module. These modules are composed of 50 to 200 membrane elements. Check out our series of membrane bioreactor modules produced from Toray down below to determine which type is best suited for your application. 

Toray Membrane Bioreactor (MBR) NHP210 SERIES

TORAY MEMBRANE BIOREACTOR (MBR) NHP210 SERIES

  • Nominal pore size is 0.08 microns
  • 300 and 600 membrane elements
  • PET non-woven support layer
  • 0.7 m² membrane area
Toray Membrane Bioreactor (MBR) TMR090 SERIES

TORAY MEMBRANE BIOREACTOR (MBR) TMR090 SERIES

  • Nominal pore size is 0.08 microns
  • 50 or 100 membrane elements
  • PET non-woven support layer
  • 0.9 m² membrane area
Toray Membrane Bioreactor (MBR) TMR140 SERIES

TORAY MEMBRANE BIOREACTOR (MBR) TMR140 SERIES

  • Nominal pore size is 0.08 microns
  • 50 and 200 membrane elements
  • PET non-woven support layer
  • 1.4 m² membrane area

Toray's Bioreactor Membrane (MBR) cycle is a mixture of treating wastewater and membrane filtration. This process effectively reduces biodegradable pollution by utilizing bacteria and pathogenic microorganisms. After biological treatment, a microfiltration membrane is used to separate the activated-sludge from the treated water.

toray-membrane-bioreactor-mbr-modules-banner.jpg

Type of Membrane Modules: 

  • TMR140 SERIES:

Toray's MEMBRAY® MBR Membranes are PVDF flat sheet membranes with a PET non-woven support layer. The nominal pore size is 0.08 microns with a narrow pore size distribution. Toray membrane elements with a 1.4 m2 membrane area are joined to our membrane module. These modules are composed of 50 to 200 membrane elements.

MEMBRAY® modules consist of a membrane element, a stainless steel element frame, a permeated water manifold and an aeration block. MEMBRAY® TMR140 Series have been certified by California Department of Public Health (CDPH) as an acceptable filtration technology for compliance with the State of California Water Recycling Criteria (Title 22) since October 2008.

MEMBRAY Submerged Flat Sheet Membrane Modules for MBR - TMR140 Series Data Sheet

  • TMR090 SERIES:  

Toray's MEMBRAY® MBR Membranes are PVDF flat sheet membranes with a PET non-woven support layer. The nominal pore size is 0.08 microns with a narrow pore size distribution. Toray membrane elements with a 0.9 m2 membrane area are joined to our membrane module. These modules are composed of 50 or 100 membrane elements.

MEMBRAY® modules consist of a membrane element, a stainless steel element frame, a permeated water manifold and an aeration block.

MEMBRAY Submerged Flat Sheet Membrane Modules for MBR - TMR090 Series Data Sheet

Toray's Membrane Bioreactor (MBR) procedure is a solution of organic effluent treatment and membrane filtration. Biodegradable contamination is lowered by the usage of pathogens and biological microorganisms. Once organic treatment is completed, the stimulated sludge is detached from the treated water by a microfiltration element. 

Toray is a leading manufacturer in wastewater treatment membrane technology, first-rate membranes, and correlative water purification systems to assist its consumers enhance their effectiveness and plant performance. Toray is one of the few membrane bioreactor companies with proficiency throughout a variety of custom water purification membranes, which include membrane bioreactors, reverse osmosis membranes, ultrafiltration membranes, microfiltration membranes, and nanofiltration membranes.

 MEMBRAY Submerged Flat Sheet Membrane Modules for MBR - TMR090 Series Data Sheet