Clack WS2CI Control Valve

Product Description

Clack introduced its first line of residential control valves. The goal was to design a family of control valves for the water treatment professional that covered the greatest range of applications, while having the greatest commonality of parts.All Clack valves incorporate patented* “stack technology” and feature state-of-the-art electronics and programming software.

[custom-specifications]

Water Specialist 2” CI Control Specifications
Cycles	up to 9
Valve Material	Lead free brass
Regeneration	downflow
Flow Rate
Service @15 psi drop (includes bypass and meter)	435 lpm (26.1 m³/h) (115 gpm)
Backwash @ 25 psi drop (includes bypass)	303 lpm (18.2 m³/h) (80 gpm)
Cv Service	29.7
Cv Backwash .	16
Operating Pressures
Minimum/Maximum	20 psi – 125 psi
Operating Temperatures
Minimum/Maximum	40° – 110° F
Meter
Accuracy	± 5%
Flow Rate Range.	2 - 284 lpm (0.5 - 75 gpm)
Gallon Range	0.02 - 5,700 m³
Totalizer	264 - 26,417,000 gallons
Dimensions & Weight
Distributor Pilot	1.050" OD Pipe (¾" NPS)
Drain Line	1.5” Female NPT
Brine Line	1” Male NPT elbow
Mounting Base	4" - 8 UN
Height From Top Of Tank	216 mm (8.5”)
Weight	29 lbs
Electrical Specifications
Supply Voltage	120V AC
Supply Frequency	60 Hz
Output Voltage	12V AC
Output Current	500 mA
Tank Applications
Water Softener	12” – 48” diameter
Water Filter (2)	12” – 36” diameter
Cycles of Operation (Softener / Filter downflow)
1. Backwash 1st	1-120
2. Rinse	1-120
3. Pause	1- 480
4. Brine	1-180
5. Refill Softner	0.1 - 99.0 minutes
6. Refill Filter	0.1 - 99.0 minutes

[/custom-specifications]

[custom-features]

2” Top mount control valve suited for commercial/industrial applications
Epoxy coated lead free brass valve body
Economical stainless steel optional meter assembly
Service flow rate of 435 lpm (26.1 m³/h) (115 gpm), backwash 303 lpm (18.2 m³/h) (80 gpm)
Solid state microprocessor with easy access front panel settings
Front panel display for time of day, days until next regeneration, volume remaining and current flow rate.
Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential
Program in ppm, French degrees, German degrees, or cubic meters
Fully programmable regeneration cycle sequence (maximum 9)
Programmable regeneration cycle times
Days override feature; 1-28 days available
Coin Cell Lithium battery back-up with an 24 hour carry over
12-volt output AC Adapter provides safe and easy installation
Pre or Post treated water regenerant refill
24 Hour Clock
Reliable and proven DC drive
Patented one piece expanding seal spacer stack assembly U.S. Patent 6,402,944
Patented linearly reciprocating piston operation U.S. Patent 6,444,127

[/custom-features]