Application: Food & Beverage Company
This is model TW-18K-4340 from our RO-300 Series.
- Carbon filter
- Water softener
- UV and Ozone
- RO system [RO-300 series]
- Microprocessor control panel
- TW-18K-4340
- Produce 18,000 GPD
- 1000 PPM TDS Feed
Osmosis naturally carries salt through a semipermeable membrane from an area with low saline concentration to an area with high saline concentration to gain an equal amount of saline concentration on both sides. Halting this natural process requires the assistance of a technology called "reverse osmosis". Reverse Osmosis is tasked with directing osmosis in the opposite direction. This is done by using a high pressure pump that applies extreme pressure to the highly saline concentrated side of the membrane, forcing salty water across the semipermeable membrane, allowing only water molecules to flow in while rejecting salts and other impurities from passing through. Finally, purified water comes out on the permeate side while salt and other impurities are discharged into a drain from the concentrate side.
[custom-specifications]
Water Challenges: Water treatment is required in the food and beverage industry in order to ensure the utilization of high quality water within the production of these products. Water is by far the most important product element used in this industry, and necessitates a degree of quality in order to produce fresh and edible food and beverage products. Some features created from the existence of contaminants such as total dissolved solids in the feed water are bad taste, smell and texture. These elements are obviously vital to the value of any food and beverage item, which epitomizes the importance of quality water.
[/custom-specifications]
[custom-features]
Applied Solution: A Commercial Reverse Osmosis system with pre and post treatment to a major company in Bangladesh. The system includes carbon filter and water softener as pre treatment and UV with Ozone system for post treatment. The system was designed to produce 18,000 GPD. Since the initial startup, the machine has been operating accordingly with minimal troubleshooting. An RO machine is manufactured for the purpose of removing large amounts of salts, minerals, and other contaminants from waters that are highly inconsumable. A high pressure pump is employed to fight the osmotic pressure of a natural process called “Osmosis”.
[/custom-features]
[custom-usage]
[/custom-usage]
Commercial RO 18000 GPD - Bangladesh - Case Study [/custom-documents]
-
Engineers at Pure Aqua are knowledgeable & provide great customer service
I am very satisfied in using this product!