RO System 7500 GPD - Guyana

Since the initial startup, the machine has been operating accordingly with minimal troubleshooting. An RO machine is manufactured for the purpose of removing large amounts of salts, minerals, and other contaminants from waters that are highly inconsumable. A high pressure pump is employed to fight the osmotic pressure of a natural process called “Osmosis”.

Osmosis naturally carries salt through a semi permeable membrane from an area with low saline concentration to an area with high saline concentration to gain an equal amount of saline concentration on both sides. Halting this natural process requires the assistance of a technology called "reverse osmosis". Reverse Osmosis is tasked with directing osmosis in the opposite direction. This is done by using a high pressure pump that applies extreme pressure to the highly saline concentrated side of the membrane, forcing salty water across the semi permeable membrane, allowing only water molecules to flow in while rejecting salts and other impurities from passing through. Finally, purified water comes out on the permeate side while salt and the other impurities are discharged into a drain from the concentrate side. 

Country: Guyana

System/Product: Reverse Osmosis

Flow Rate: 7,500 GPD

Components & Brands:
- RO200 series
- Pre and post treatments
- Multimedia Filter
- Activated Carbon filter
- Water softener
- Ultra violet sterilizer

[custom-specifications]

Brackish water is water that is taken from estuaries and river openings. It salt concentration falls in between fresh water and seawater. Not as pure as fresh water, yet not as salty as seawater. Its mild salty concentration is discouraged for human consumption. To generate purified water from brackish water, a water filtration system relies on a method called "reverse osmosis" for assistance.

[/custom-specifications]

[custom-features]

Pure Aqua manufactured and supplied a Commercial Reverse Osmosis system with pre and post treatment to a company in Guyana to produce 7,500 GPD. The pre treatment system included a multimedia filter, activated carbon filter and a water softener. The post treatment system consisted of a ultra violet sterilizer with a capability of treating 12 gpm.

[/custom-features]

[custom-usage]

• Minimal civil work and construction
• Small footprint
• Plug and play installation
• High-quality components (Grundfos pumps, DOW Filmtec membranes, Codeline vessels, Pure Aqua microprocessor control panel)
• High recovery design
• High rejection membranes
• Low energy and chemical consumption

[/custom-usage]

[custom-documents]

[/custom-documents]