ENGLISH
ESPAÑOL
???????
PORTUGUÉS
FRANÇAIS
Uses for Single Cartridge Housings
- Designed for industrial and commercial filter applications
- Heavy duty construction for maximum durability
- Various materials of construction for wide range of process requirements
-304L or 316L stainless steel
-304L SS body
-Cast Iron Head with a steel body
- Accepts Double Open-End (DOE) cartridges
- Available with 1/4", 3/8", 1/2", 3/4", and 1" connections.
- Numerous gasket options for compatibility with most fluids
- Bolt-nut-closure design for quick cartridge change outs (T-handle optional)
- In line connections for easy installation
- Knife edge seals at both end of cartridge housing eliminate potential bypass.
[custom-specifications]
Maximum Operating Pressure
- 250 psig (17 bar) @ 275°F (135°C)
- 125 psig (8.6 bar) @ 200°F (93.3°C): FAC-15 Series
Connections
- Inlet /Outlet: 1/2", 3/4" or 1" FNPT
- 1/4" and 3/8" only available for FAC Series
- Optional: RF Flanges, Sanitary Ferrules, BSP
- Drain Port: 1/8" NPT (1/4" for FO-38 models)
Gaskets
- Buna
- Optional: EPR, Silicone, Viton, Teflon, Neoprene, Vellumoid
Materials of Construction
- Head / Shell: FAS - 304L or 316L Stainless Steel
- FAC - Cast iron head / carbon steel
- Drain: FAS - Stainless Steel Plug
- FAC - Brass Petcock
Options
- Vent Port with Vent Screw
- Gauge Ports
- Bracket Kit
- Variable Spring Load Seal
- Tee Handle
See Ordering Guide for complete selection of options
[/custom-specifications]
[custom-features]
Single Cartridge Housings with Bolt & Nut Closure for Double Open Ended Cartridges for Air and Gas Applications.
- 304L or 316L Stainless Steel, Brass Nickel Plated Head with 304L Stainless Steel Body or Cast Iron Head with a Steel Body - Heavy duty construction for durability
- Maximum operating pressure: 250 PSI (17 bar) @ 275°F (135°C).
- Available in 1/4", 3/8", 1/2", 3/4", and 1" connection sizes. connection sizes
- Wide variety of gasket options for compatibility with almost any fluid
- Designed for industrial and commercial filtration needs
- Simple Bolt & Nut closure for quick cartridge change outs (T-handle optional)
- In line fittings for easy installation (standard FNPT, flanged, sanitary (TC) or BSP connections)
- Knife edge seal provides positive sealing of double-open-ended cartridges
[/custom-features]
[custom-usage]
- Water
- Desalination
- Chemicals
- Food & Beverage
- Electronics
- Oil/Gas
- Air
- Inks/Paints/Coatings
- Gases
- Pulp & Paper
[/custom-usage]
[custom-documents] [/custom-documents]
-
The company is almost a 1-stop shop and highly recommended
Very good price
