The AquaMatic V46 Series Stainless Steel Valves are designed to permit higher flow rates than similarsized diaphragm-operated valves. They are available in 1-, 1-1/2- and 2-inch diameters in threaded or flanged ends. With all stainless steel internals and no internal threads, the V46 is ideally suited for corrosion resistant applications.
Uses for AquaMatic V46
AquaMatic V46 Valves are constructed of 316 Stainless Steel material. These valves are available in 1-, 1-1/2- and 2-inch sizes, in either threaded or flanged ends. Flanged valves are rated for 150 psi (10 bar) and threaded valves are rated for 250 psi (17 bar). With all stainless steel internals and no internal threads, this series is ideal for corrosion resistant applications.
Operating Specifications:
- Maximum Working Pressure Threaded Valves: 250 psi (17 bar), Flanged Valves: 150 psi (10.3 bar)
- Temperature Standard: 150°F (65°C), Maximum: 250°F (120°C)
- Pipe Sizes 1-, 1-1/2- and 2-inch threaded (NPT, BSPP, JIS) 1-, 1-1/2- and 2-inch flanged (U.S. or ISO)
- Standard Materials Valve body, shaft and cap cast 316 stainless steel (CF8M) alloy, all metal internals 316 stainless steel, standard seals Nitrile, diaphragm Nitrile on Polyamide
- Optional Materials Seals EPDM or FKM elastomers, diaphragm FKM on Polyester
Features:
- Y-pattern design permits higher flow than other comparably sized diaphragm operated valves
- Larger diaphragm area compared to seat area permits drip tight closing without any springs
- Diaphragm acts as an actuator, eliminating the need for electric or pneumatic actuators, which minimizes initial investment and maintenance costs
- All internal parts are replaceable without removing valve from piping
- Stainless steel (CF8M) corrosion resistant alloy, all metal internals machined from 316 stainless steel alloy
- All metal parts are passivated to improve corrosion resistance
- Reinforced diaphragms are pre-formed and stress relieved to maximize responsiveness and product life
- Ideal for corrosive applications in paper/pulp, dairy, fuel, and water treatment industries
- Can be actuated with either air or water as control fluid
Options:
- Seal and diaphragm materials available
- Resistant to corrosive atmosphere
- Limit stop for adjustable flow rate control
- Spring assist (open or closed)
- Position indicator
- Available in threaded and flanged end configurations
Typical Applications:
- Reverse Osmosis Equipment
- Laundry Equipment
- Corrosive Liquid Handling
- Process Water Systems
- Ozone Generators
- Steam Sterilization
- Bottling Plants
- Chemical Injection
- Deionization Units
- Paper and Pulp
- Condensate Polishers
-
An exceptionally state-of-the-art company
No apparent issues after 3 months of good performance. Highly reliable and good efficiency