HYDRAsub HSM1000-ES Membrane

Product Description

HYDRAsub ® provides superior-quality permeate water ideal for reverse osmosis treatment compared to traditional activated sludge treatment, and significantly reduces footprint by removing sedimentation tank and running at higher MLSS.

[custom-specifications]

	HYDRAsub® - MBR	HSM1000-ES
Module Specifications	Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight:	Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.4 μm 40 (25 m² each) 10760 ft2 (1000 m²) (2)- 3” MNPT (2)- 3” MNPT (2)- To fit 3” pipe 2398 lbs (1090 kg) 4226 lbs (1916 kg)
Operating Specifications	Maximum Trans Membrane Pressure(Vacuum): Maximum Backwash Pressure: Maximum Instantaneous Chlorine Concentration: Maximum Chlorine Tolerance: MLSS Range: Operating Temperature Range: Feed Water pH Range: Cleaning pH Range: Operating Mode:	-6 psig (-0.41 bar) 2 psig (0.14 bar) 5,000 ppm^a 742,000 ppm-hrs^b 8,000 - 12,000 mg/L^c 41 - 104°F (5 - 40°C) 6.0 - 8.0 10760 ft2 (1000 m²) 1.0 - 11.0 Outside to Inside
Typical Process Conditions	Operating Filtrate^†: Peak Operating Flux^†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: OCIP Chemicals:	4-20 gfd (7-34 lmh) 30 gfd (51 lmh) 2.4 gfd (4 lmh) NaOCl^d 2.4 gfd (4 lmh) NaOCl or Citric Acid^d