HYDRAsub HSM250-ES Membrane

Product Description

Hydranautics invented and produced a special diffuser model for controlled aeration, integrated in the stainless steel enclosure. HYDRAsub HSM250-ES Membrane is ideal for applications regarding the treatment of wastewater in industrial and municipal areas.

[custom-specifications]

	HYDRAsub® - MBR	HSM1000-ES
Module Specifications	Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight:	Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.4 μm 10 (25 m² each) 2690 ft2 (250 m²) (2)- 2” MNPT (2)- 2” MNPT (2)- 2” MNPT(2)- To fit 3” pipe 572 lbs (260 kg) 1406 lbs (637 kg)
Operating Specifications	Maximum Trans Membrane Pressure(Vacuum): Maximum Backwash Pressure: Maximum Instantaneous Chlorine Concentration: Maximum Chlorine Tolerance: MLSS Range: Operating Temperature Range: Feed Water pH Range: Cleaning pH Range: Operating Mode:	-6 psig (-0.41 bar) 2 psig (0.14 bar) 5,000 ppm^a 742,000 ppm-hrs^b 8,000-12,000 mg/L^c 41-104°F (5 -40°C) 6.0-8.0 1.0 - 11.0 Outside to Inside
Typical Process Conditions	Operating Filtrate Flux^†: Peak Operating Flux^†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: CIP Chemicals:	4-20 gfd (7-34 lmh) 30 gfd (51 lmh) 2.4 gfd (4 lmh) NaOCl^d 2.4 gfd (4 lmh) NaOCl or Citric Acid^d