Reverse Osmosis System for Spot Free Rinse 43,000 GPD - Texas, USA

This project included the fabrication of a 43,000 GPD Brackish Water Reverse Osmosis System that was sent to Texas, USA. The application for this RO system was a Car Wash application where the customer was drawing well water at around 7,000 ppm.

Features:

- 43,000 GPD Brackish Reverse Osmosis System for Car Wash
- Complete BWRO System with Pre-Treatment
- Achieved Desired TDS Level as per Customer Requirements
- Grundfos Feed & Backwash 316L SS Pump
- Pre & Dechlorination and Antiscalant Dosing Systems
- Automatic Multi-Media Filter to Reduce TSS and Turbidity
- Schedule 80 PVC Low-Pressure Piping
- 5 Micron 316 L Stainless Steel Filter Housing
- Pure Aqua 316L Stainless Steel Pressure Gauges
- Stainless Steel Grundfos CRN High-Pressure Pump
- 316L Stainless Steel High-Pressure Piping
- ESPA2-LD Hydranautics Brackish Membranes
- Automatic Reject Flush to Prolong Membranes Life
- Variable Frequency Drive (VFD)
- Advanced Pure Aqua Microprocessor Control Panel
- Epoxy Coated Carbon Steel Skid

[custom-specifications]

Water Challenges: The availability of freshwater supplies to car wash application is decreasing each year. The quality of water needed makes it increasingly difficult to attain the first-rate services that car washes promise to provide. Recent challenges of elevated TDS levels in water within a car wash application in Texas, USA, has engendered our crew to a reverse osmosis system to resolve this issue.

[/custom-specifications]

[custom-features]

Applied Solution: Pure Aqua makes brackish reverse osmosis systems that filter water from salty or mineral-rich sources. High-pressure pumps push brackish water through semi-permeable membranes with small holes in these RO systems. These pores allow the feedwater to pass through, but they prevent all pollutants from passing through with the water.

[/custom-features]

[custom-usage]

Production of unmatched quality fresh, clean water that is consumable for the population.

[/custom-usage]