SWRO System 7600 GPD - UAE

Application: Drinking Water

This is model SW-7.6K-804 from our SWC Series.

• Multi-Media Filtration
• Antiscalant Dosing System
• Produce 7,600 GPD
• 42,000 PPM Feed Water TDS
• Advanced Microprocessor
• SWC Series

From its initial start-up, the system has been running properly with minimal trouble-shooting. Seawater reverse osmosis systems are mainly designed for the removal of enormous amounts of salt and other impurities from highly inconsumable water sources like the sea. These systems take use of a popular process known as “reverse osmosis” to help in seawater purification. The job of reverse osmosis is to defeat the osmotic pressure of a natural process called “osmosis”. Osmosis naturally pushes salt through a very fine membrane from an area with low saline concentration to an area with high saline concentration. The goal of osmosis is to gain an equal amount of saline concentration on both sides. To stop this natural process, reverse osmosis pushes osmosis in the opposite direction by using a high pressure pump that adds extreme pressure to the highly concentrated saline side of the membrane. The pressure pushes only water molecules through the small pores of the membrane while rejecting salts and other impurities from flowing through. Clean, potable water successfully comes out on the permeate side while salt and the other impurities are dumped into a drain from the concentrate side.

[custom-specifications]

Water Challenges: Converting seawater into drinking water is a hefty challenge due to the extremely high levels of saline present in the ocean. Humans who consume large portions of seawater risk toxication since our bodies are unable to dispose of the high amount of salt that is ingested from the water. While the human body is naturally able to eliminate excess salt with urine produced by our kidneys, it required freshwater to quell the salt in order for the kidneys to function properly. For this reason, seawater must be treated with water purification systems that work to eradicate the high levels of salt before being used as drinking water. This project concentrated on delivering a seawater reverse osmosis system that produces drinking water from seawater for a company in the UAE.

[/custom-specifications]

[custom-features]

Applied Solution: Pure Aqua manufactured and supplied a Sea Water RO System to Company in UAE. It was designed for 7,600 GPD.

[/custom-features]

[custom-usage]

• Low energy consumption
• Made in USA
• Premium quality components
• Quick to install
• Environmentally friendly
• Cost effective
• Modular
• Fully supported
• High quality product water that meets the guidelines for Drinking Water Quality

[/custom-usage]