Tap Water RO System 3X 9,000 GPD - Canada

The tap water reverse osmosis combination was designed and fulfills the purpose of treating municipal tap water to make it suitable for routine uses. It is widely recognized around the world that these machines hold great importance to the daily of many individuals. The tap water reverse osmosis combination takes water contaminated with salt, impurities and filthy and strips it of all in order to make it consumable. The pump applies a great amount of pressure forcing the water through the layers of the membrane at which point the different layers grasp onto the unwanted particles leaving the water to continue through the cycle. The unwanted particles are released through the concentrated piping and discarded while the pure water is released to the user through another pipe. This tap water reverse osmosis combination is pretreated with activated carbon filters, dechlorination and water softener before completing the reverse osmosis process.

Date: April 2013

Country: Canada

System/Product: Tap Water Reverse Osmosis Unit

Flow Rate: 3X 9,000 GPD

Components & Brands:
- RO system (RO-200 series)

[custom-specifications]

Estuaries and river openings are places where brackish water can be found. This type of water lies in between fresh water and seawater. It’s not as clean as fresh water, yet not so highly concentrated in salt as seawater. Even if it has a mild salt concentration, it is still not encouraged for consumption.

[/custom-specifications]

[custom-features]

A Tap Water Reverse Osmosis System was supplied to a major company in Canada.

[/custom-features]

[custom-usage]

• Minimal civil work and construction
• Small footprint
• Plug and play installation
• High-quality components (Grundfos pumps, DOW Filmtec membranes, Codeline vessels, Pure Aqua microprocessor control panel)
• High recovery design
• High rejection membranes
• Low energy and chemical consumption

[/custom-usage]