Country: Chile
System/Product: Twin Alternating Water Softener
Flow Rate: 2x 387,200 GPD
Component & Brands:
- Steel tanks
- Advanced PLC
- Motorized butterfly valves
[custom-specifications]
The twin alternating water softener unit was created and executed in order to remove hardness from water. Water hardness does not alloq soaps to work to their maximum potential. Hardness makes washing clothes challenging and leaves skin with a "slippery" look.
To learn more about these, visit our Effects Of Hard Water page
[/custom-specifications]
[custom-features]
Pure Aqua manufactured and supplied a steel tank twin alternating water softener system with advanced PLC controls and motorized butterfly valves to a major company in Chile.
The twin alternating softener process works by having one tank remove hardness while the other is regenerating. The first tank is full of sodium ion-saturated resin. As water is going through the cycle, the resin attracts the calcium and magnesium ions that make the water hard. This then leaves the water with only sodium ions which do not have the same effect on soaps and detergents as calcium and magnesium ions have which leaves the water "soft". Once the first tank is full to capacity of taking calcium and magnesium ions, the tanks switch roles. Now the second tank will accept the role of removing hardness from water. The regeneration part of the process flushes a solution full of sodium ions through the tank, the resin now releases the calcium and magnesium ions and absorbs the sodium ions. This leaves the tank and resin in its original state again in order to repeat the process. The calcium and magnesium ions are discarded leaving the water soft and ideal for usage in hotels, schools, or restaurants.
[/custom-features]
[custom-usage]
- Reduced costs / Material use.
- Less power consumption.
- Longer life span of plant equipment
- Decreased cost of repair & maintenance.
- Greater water quality
[/custom-usage]
[custom-documents]
[/custom-documents]
-
We value the water quality
We value the water quality being displayed during time of operation which we can show our clients the actual conductivity of product being produced at least on the TDS level.