EK Shallow Well Jet Pump Series

Product Description

Whether operating as a shallow well or deep well pump, count on these product versatile, powerful jet pumps to deliver more water at full city pressures. These pumps provide higher single stage capacities and pressures; depths to 150 feet, capacities to 1800 GPH and as much as 90 pound pressure.

Includes: Pump, Motor, Pressure Switch and Ejector.

NOTE: EK05S and EK07S feature built-in ejector - no assembly required. EK10S ejector requires assembly.

[custom-specifications]

Model	HP	Suction Lift. Ft.	Discharge Pressure (PSI)				Shut Off Pressure @0 Lift (PSI)	Suction & Discharge	Pressure Switch Setting - PSI	Pump Shipping Weight
			20	30	40	50
			Capacity – U.S. Gallons Per Minute
EK05S	1/2	5 15 25	10.5 7.6 4.5	9.5 7.3 4.2	5.8 4.5 3.5	4.0 2.5 2.0	60	1- ¼” x ¾”	20-40	40
EK07S	3/4	5 15 25	15.5 11.9 6.0	15.0 11.7 5.8	10.0 9.1 5.2	5.8 3.8 2.0	65	1- ¼” x ¾”	30-50	41
EK10S	1	5 15 25	20.0 15.8 10.0	20.0 15.5 9.7	19.5 15.0 9.5	18.3 14.5 9.0	65 60 55	1- ¼” x 1”	30-50	51

[/custom-specifications]

[custom-features]

High Tensile Gray Iron Pump Bodies

Large water cavities provide fast, easy priming. Separate priming ports enable quick water fill and the fast evacuation of air. Separate 1/4” tappings are provided for the convenient mounting of pressure/vacuum gauges and the pressure switch, and for pump draining.

Buna-n Quadraseal

Reusable — provides a positive seal between the pump case and motor bracket.

Molded Diffusers

Corrosion and abrasion resistant, provide precision alignment with the impeller for maximum performance. The snapin diffuser design uses no bolts and is held in place by compression.

Impellers —

Precision balanced, these impellers are ultra-smooth for high efficiency. 1/3 thru 1 HP CPJ, CPH, and EK models feature molded thermoplastic impellers. 1-1/2 HP CPJ models feature brass impellers.

Pipe Plugs and Priming Plugs

Coated with a non-hardening, non-toxic, non-corrosive material which allows for easy removal even after the pump has been in service for years.

Standard Shaft Seal

Silicon carbide face is self-adjusting throughout the seal life.One size fits all models.

CPH and EK Patented Uni-frame Motor Bracket

Unique to the water systems industry — designed to accept any NEMA J motor if motor replacement is ever necessary.

Automatic Overload

Senses both start and run winding heat to ensure complete winding protection.

[/custom-features]

[custom-usage]