HYDRAsub HSM75-ES-HSE15 Membrane

Product Description

In comparison with traditional activated sludge treatment, MBR and specifically HYDRAsub ® generate high-quality permeate water desirable for reverse osmosis purification, while significantly lowering footprint by removing sedimentation tank and activity at greater Mixed Suspended Liquor Solids (MLSS).

[custom-specifications]

	HYDRAsub® - MBR	HSM75-ES-HSE15
Module Specifications	Configuration: Fiber Orientation: Filtrate Flow: Membrane Polymer: Pore Size (nominal): Number of Elements in Module: Nominal Membrane Area per Module: Permeate Connections: Air Connections: Guide Pipe Connections: Typical Module Dry Weight: Typical Module Wet Weight:	Submerged Membrane Vertical Bi-directional Polyvinylidene Flouride (PVDF) 0.4 μm 5 (25 m² each) 807ft2(75m²) (2)-2”MNPT (2)-11/2”MNPT (2)-to fit2.5” pipes 281 lbs(127kg) 386 lbs(175kg)
Operating Specifications	Maximum Trans Membrane Pressure(Vacuum): Maximum Backwash Pressure: Maximum Instantaneous Chlorine Concentration: Maximum Chlorine Tolerance: MLSS Range: Operating Temperature Range: Feed Water pH Range: Cleaning pH Range: Operating Mode	-6 psig (-0.41 bar) 2 psig (0.14 bar) 5,000 ppm^a 742,000 ppm-hrs^b 8,000-12,000 mg/L^c 41-104°F (5 -40°C) 6.0-8.0 1.0 - 11.0 Outside to Inside
Typical Process Conditions	Operating Filtrate Flux^†: Peak Operating Flux^†: Chemically Enhanced Backwash (CEB) Flux: CEB Chemicals: Clean In Place (CIP) Flux: CIP Chemicals:	4-20 gfd (7-34 lmh) 30 gfd (51 lmh) 2.4 gfd (4 lmh) NaOCl^d 2.4 gfd (4 lmh) NaOCl or Citric Acid^d