Webtrol Self Priming SS Centrifugal Pumps

Product Description

The Webtrol Stainless Steel Self Priming Centrifugal Pump is the professionals choice when it comes to a self priming centrifugal that has a suction lift of 25’. In many applications it is not possible to install the pump below the water line of the fluid being pumped, to provide a gravity flow into the pump. The Webtrol stainless steel, self priming centrifugal pump is designed to be installed above the water line where a suction lift would be required. These versatile and reliable pumps offer a superior alternative to standard cast iron jet or centrifugal pumps.

To insure that you have no problems at startup and thought the operation of the pump, every complete pump is thoroughly water tested for performance, electrical draw. noise and vibration.

[custom-specifications]

Model No.

Discharge / Suction / Imp.

(inch-NPTF)

A

Dimension

Single Phase Unit Weight (lbs.)

Three Phase Unit Weight (lbs.)

ODP

TEFC

ODP

TEFC

SPC75

1” x 1 1/4” x 4 1/2”

15 1/8”

37

41

39

43

SPC150

1” x 1 1/4” x 5 3/16”

15 9/16”

42

46

44

48

[/custom-specifications]

[custom-features]

  • Close Coupled for smooth transmission of power.
  • 304L Stainless Steel pump case, motor bracket and impeller.
  • Centerline Discharge provide maximum resistance to misalignment.
  • Non-Overloading Motor rated for continuous duty throughout the entire operating range.
  • High Operating Efficiency over a wide range of capacities.
  • Back Pullout Design for ease of servicing the pump without disturbing the piping system.
  • Mechanical Seal for maximum reliability and economic value.
Performance
  • Capacities to 19 GPM
  • Heads to 180’
SPC Models

Size:                             Suction All Models . . . . . . . . . . . .1 1/4” NPT
                                        Discharge All Models . . . . . . . . . .1 1/4” NPT

Liquid Handled:    Type of liquid . . . . . . . . . . . . . . . . .Clean Water
                                       Temperature of Liquid . . . . . . . .113 Degrees (F) Max.
                                       Working Pressure . . . . . . . . . . . . .85 PSI Max.
                                       Suction Lift . . . . . . . . . . . . . . . . .25 Ft. @ 68 degrees (F)

Materials:                 Casing . . . . . . . . . . . . . . . . . . . .304 Stainless Steel
                                       Impeller . . . . . . . . . . . . . . . . . . .304 Stainless Steel
                                       Shaft . . . . . . . . . . . . . . . . . . . . .Stainless Steel
                                       Bracket . . . . . . . . . . . . . . . . .  . .Aluminum
                                       Mechanical Seal . . . . . . . . . . . .Carbon/Ceramic

Motor:                        Type . . . . . . . . . . . . . . . . . . . . . .NEMA 56J / ODP or TEFC
                                       Speed . . . . . . . . . . . . . . . . . . . .3450 RPM (2 pole)
                                       Phase / Voltage . . . . . . . . . . . . .1 Phase 115/230V
                                                                                                 3 Phase 208-230/460V
                                       Housing . . . . . . . . . . . . . . . . . .Aluminum
                                       Rotation . . . . . . . . . . . . . . . . . .Clockwise when viewed from motor end

[/custom-features]
[custom-usage]

Typical Services
  • Home drinking water systems
  • Deionized Systems
  • Reverse Osmosis Systems
  • Distribution Systems
  • Misting Systems
  • Car Wash Systems
  • Liquid Transfer Systems
  • Circulation Systems
  • Pre-Filter Charge System
  • Condensation Systems
  • Cooling Tower Systems

[/custom-usage]

[custom-documents] [/custom-documents]
Models
Features
Applications
Docs
Videos
Reviews
(1 review) Write a Review
  • 5
    always in stock

    Posted by Pillaz M. on Jan 22nd 2020

    Service was exceptional. Great company!

Related Products